R&S®RTO2000 oscilloscope-Rental

Key facts

• Precise measurements due to very low noise level
• Up to 16-bit vertical resolution
• Trigger on any signal detail you can see
• Quickly find signal faults with 1 million waveforms/s
• Integrated spectrum analysis

Precise measurements due to very low noise level

Minimizing noise was a key goal when designing the
R&S®RTO. All aspects were considered, from balanced
BNC-compatible inputs with 18 GHz bandwidth to
extremely low-inherent-noise frontends to high-precision
A/D converters. The result: precise measurements even at
the smallest vertical resolutions.

Up to 16-bit vertical resolution

The low-noise frontend and 10 GHz single-core A/D converter are the foundation for the extraordinarily high measurement accuracy and dynamic range of the R&S®RTO
oscilloscopes. The high definition mode (HD mode) activates a configurable hardware lowpass filter, increasing
the vertical resolution to up to 16 bit and 9.4 ENOB. Since
filtering reduces quantizing noise, signal details become
visible.

Trigger on any signal detail you can see

The unique digital trigger system from Rohde&Schwarz
uses the sampling points of the A/D converter in the
acquisition path so that the trigger system's input data is
identical to the displayed signal. The trigger system runs in
HD mode with up to 16-bit vertical resolution. This results
in a very high trigger sensitivity. You can reliably isolate
even the smallest signal details. 

Quickly find signal faults with 1 million waveforms/s

R&S®RTO oscilloscopes display up to 1 million
waveforms/s. To make this possible, Rohde&Schwarz
developed an ASIC with optimized signal processing.
R&S®RTO oscilloscopes enable you to quickly and reliably detect sporadic signal faults. A high acquisition rate
is even available when histograms, masks or cursor measurements are active.

Integrated spectrum analysis

Frequency analysis is easy. Simply set the center frequency, span and resolution bandwidth on the R&S®RTO
oscilloscopes for up to four analog signals – just like on a
spectrum analyzer. Thanks to many years of experience
in RF development, the R&S®RTO oscilloscopes offer an
outstanding dynamic range. The FFT based spectrum analyzer is ultrafast, making it ideal for capturing sporadic disturbance signals. For debugging, R&S®RTO oscilloscopes
simultaneously display the spectrum and the associated
signal path and correlate events. The spectrogram mode,
different detectors (such as max. hold) and mask tests
offer further analysis capabilities